Hi, So I've been using Blue Iris for a while now and everything has gone fairly smoothly. I upgraded to windows 10, reinstalled Blue Iris (3.66) and started adding my cameras. The first one I added gave me a timeout 12002 error, I didn't think much of it and kept adding my other cameras. The other 5 worked just fine. So, a day later still had the time out error so I tried connecting to my camera directly via a web browser. I connected no problem and could see the video fine. So, I removed the camera from Blue Iris and re-added it. Same problem. I then tried updating the firmware / system on the camera, all went successfully but still not working in Blue Iris. I have 3 of the same camera Foscam 8921 v2 and the other two are working just fine with Blue Iris. And before I installed windows 10 this one worked just fine too.
I can also remotely view the camera via the IP just fine.
The only things that have changed are the computer's OS (went from 7 to 10) and the Blue Iris version. I had 3.xx before but it wasn't 3.66 like I have now. I think it was 3.5x but I don't recall. And now I have obviously updated the camera's firmware.
Oh also, the inspect camera function works in Blue Iris.
I'm stumped on what to do. I did try turning off the windows firewall also and that didn't help either, nor did I think it would as obviously the rest of the cameras worked just fine.
I can also remotely view the camera via the IP just fine.
The only things that have changed are the computer's OS (went from 7 to 10) and the Blue Iris version. I had 3.xx before but it wasn't 3.66 like I have now. I think it was 3.5x but I don't recall. And now I have obviously updated the camera's firmware.
Oh also, the inspect camera function works in Blue Iris.
I'm stumped on what to do. I did try turning off the windows firewall also and that didn't help either, nor did I think it would as obviously the rest of the cameras worked just fine.
