Blue Iris Keeps Panning Fully to the Right

[spybaz]

Blue Iris Keeps Panning Fully to the Right

Is anyone else experiencing this lately?

3 times in the last month, my camera has suddenly started panning fully to the right when I click any arrow/direction button. When I click the arrow/direction buttons on the web interface, without BI running, that works fine. As soon as I involve BI at all, the mad panning starts.

To resolve, after hours of TSing (with AI), I have to fully delete the camera from BI and set it up fresh. I do this and then a few days or weeks later, it starts happening again. As I said, 3 times in the last month.

It is a generic camera from Amazon but it's pretty good and no problems with its own web interface or its own app.

Anyone got any idea how to stop this from happening?

Also going to post same in IP Cam Talk

Thanks.

 

[Bruce_H]

Do you have some other pointing device connected to your computer perhaps a device for aircraft control simulation?

 

[bp2008]

I assume you're using Blue Iris's ONVIF mode to do the PTZ controls? You could try Onvif Device Manager.

If both programs have the same issue, then it is the camera's fault. If only Blue Iris has the issue and Onvif Device Manager can control it with no problem, then it'll be Blue Iris's fault and you would need to contact Blue Iris support.

 

[spybaz]

Good thought. I have an xbox controller plugged in but not on. It's always plugged in but I'll check to see if there's something going on there. Thanks.

 

[spybaz]

I assume you're using Blue Iris's ONVIF mode to do the PTZ controls? You could try Onvif Device Manager.

If both programs have the same issue, then it is the camera's fault. If only Blue Iris has the issue and Onvif Device Manager can control it with no problem, then it'll be Blue Iris's fault and you would need to contact Blue Iris support.

I'll check it out next time it happens, thanks.