Blue Iris not detecting new NVR IP Cameras

duronking

n3wb
Feb 17, 2017
1
0
Hello everyone,

I recently purchased a cheap e-bay NVR system that comes with 8x 1080MP Cameras.

2MP 1080P HD 8pcs 48LEDs CCTV IP DOME Camera 8CH P&P POE NVR SYSTEM AU SHIPPING | eBay
s-l1600.jpg


My current system that I am using is a Zmodo ZP-NC18-S which has 8x 720P IP Cameras(ZP-TBT15-8), 2 of the cameras have since been vandalised so I was considering changing to a newer system, hence the need for a new system.

I've been running Blue Iris for almost 2 months now and prefer it over the web-based system of the NVR's.

I've setup the new system, with one camera attached to see if blue Iris would detect it, unfortunately it does not. The system is obviously an el-cheapo offering from ebay as there's no identifiable model numbers on it.

I've taken a few pictures of the setup to see if anyone might have an idea of what generic brand the cameras would be.
There are no identifying stickers on the back of the cameras either.

33molco.jpg

rmpqm8.jpg

e9c20j.jpg


I've specified the IP of 172.25.123.26 of the camera in Find/inspect setup for the camera, filled in the correct admin/passworld fields, and have tried all the different types of address modes: http, https, rtsp, rtmp and rtmps.

The cameras don't show up when doing a search, any help would be appreciated. The Blue Iris version is a fully paid for version also. Thanks
 
See sticky in troubleshooting section...you need to enter the NVR's ip address...
next time dont buy cheap junk..its not worth it. If you can send it back, do it.