CAM-IPM-3B-29IR

[Tolting Colt Acres]

I have recently come into possession of an IP camera, the only identifying mark is a sticker on the bottom, indicating the model # is CAM-IPM-3B-29IR POE 3MP.

Googling this yields a few references to Aventura Technologies. Visiting their web site yields nothing useful.

I am attempting to figure out how to perform a factory reset on this unit, since I do not know what the IP address is. It is not configured with DHCP, I've scanned my DHCP IP address range and do not find the camera. I've tried the "default" IP address I found mentioned in a reference manual, also with no success.

Is anyone familiar with this camera, and how I can perform a hard factory reset?

Thanks.

 

[VorlonFrog]

Is anyone familiar with this camera, and how I can perform a hard factory reset?
Thanks.

Pictures of the back and underside of the camera will help, greatly.
There's usually a pinhole in the plastic case with a small push-button beneath.
Remove power, push button.
While holding button pushed, apply power and continue to hold button for 30 seconds.
That will usually do the trick.

 

[Tolting Colt Acres]

I disassembled the unit and I found a button on one of the boards. However, pressing it (pressing and holding, pressing and holding while applying power, etc.) has no effect that I have been able to determine.