Cam Only streams RTSP on Port 554. Need other port.

D

Denitdm

n3wb
Apr 8, 2019
2
0
germany
Hey everybody,

i have a few SZSINOCAMS Model SN-IPC-4024 CSW running. All works fine so far.

But: If i change the RTS port from 554 to for example 2023, i can not access to the RTSP stream anymore.
If running more than one cam ist definately necessary to have a different RTSP port on each cam. Otherwise i can not connect all at the same time from outside.

Can somebody help me or does anybody has a good idear?


p.s. on privous/older firmwares it was possible. 3 of 6 cams have different RTSP ports and it works. Just the last 3 i bought only work with port 554.

Im pretty sure that router settings are corret cause configurated the porttriggering and so an as usual.


Best rgds,
Dennis
 
Because a lot of the cameras firmwares have known backdoors and other insecurities, a lot of folks here setup a VPN that allows them to remotely connect back to their home network when they're outside of it.... it's much safer than port forwarding. Once connected to the VPN, you'd access the cameras the same way that you would if you were at home.
 
  • Like
Reactions: Denitdm
many thanks. that could be an option. i didnt think about a vpn before.
but anyway if somebody hacks my cams... they just observe parts of my garden. wouldnt be that interesting i guess. i didnt even set a login for the rtsp stream.. :D
login just for the webinterface to confugure the settings.
 
You must log in or register to reply here.
Top Bottom