Camera Web gui

[gurkenhals]

Hello everyone, I made a mistake when setting to https, since then I can no longer access the camera interface and can only access the NVR. What can I do?

 

[wittaj]

Factory reset the camera.

 

[gurkenhals]

I'm having a hard time getting to the camera, is there no other way?

 

[TonyR]

Hello everyone, I made a mistake when setting to https, since then I can no longer access the camera interface and can only access the NVR. What can I do?

View attachment 181120

You could assign your PC a static IP of 10.1.1.20, subnet mask 255.255.255.0 and plug the PC with a patch cable directly into one of the NVR's POE ports.
Then open a browser to 10.1.1.65:443 (the cam's IP + colon + HTTPS port number), assuming the default 443 is used.
If by some miracle you get into the cam's webGUI look for something like "Settings" => "System" => "Default" (or "Factory Default").

It's a Hail Mary but since you have "...a hard time getting to the camera" you have little to lose.

 

[gurkenhals]

Change worked (without :443). Thank you very much..

 

[wittaj]

And now don't change stuff you don't know what it does LOL.

Changing cameras and NVRs to https doesn't make it any more secure and in fact gives a false sense of security.

 

[TonyR]

+1^^^

Change worked (without :443). Thank you very much..

You're welcome!