Cannot connect to camera through PoE switch...

[Moonville]

I apologize but i'm by no means an expert so i'm somewhat learning as we go myself

No apology necessary - I greatly appreciate your help.

Get an extra ethernet cable and plug any of the 1-24 ports to your internet router and then plug your BI PC to the Brocade switch 1-24. What's the IP address on your BI PC after that?

I wasn't sure which NIC to do that with so I did it both ways. With the 2nd NIC there was no change from the 169*. With the native NIC the result was 192.168.1.95

 

[elwood]

No apology necessary - I greatly appreciate your help.


I wasn't sure which NIC to do that with so I did it both ways. With the 2nd NIC there was no change from the 169*. With the native NIC the result was 192.168.1.95

Do you have internet access? If so, and you want, install TeamViewer and PM me the ID/password and i'll remote in and figure out the Brocade IP and possibly get things running agian.