Can't log into camera basic settings with ivms4200?

Calvinder

n3wb
Joined
Aug 27, 2020
Messages
12
Reaction score
0
Location
Mexico
Hello all
I have been running this system for years. I run three cameras via wifi.
Cams DS-2CD2041G1-IDW1 Firmware V5.5.82 build 190130
NVR Ds-7608ni-k2/8p Firmware Version: 4.30.005build200628
ivms4200 3.7.1.5
I recently moved and had to re configure the cameras for the new internet connection.
I connected them to the router and found them with SADP and ivms4200 and got them online. My problem is even though I can get the online when I try to go into the basic settings all I get is
Access Error: 404 -- Not Found
Can't locate document: /notSupported.asp

The strange thing is is one of the cameras I was able to get into settings until I unplugged the ethernet cable to move it and now I can't.
I even set one to factory settings and have it back on line but with no luck.
Update is I had everything turned of for a few days and when I reconnected the cameras to the router via ethernet I could access settings. about 5 minutes later if I go out of settings I can't get back in.

I hope someone can help

Thanks in advance
 

enderdogan

n3wb
Joined
May 10, 2022
Messages
7
Reaction score
1
Location
Türkiye
merhaba,

Cihazlara internet sağlayıcınız üzerinden ulaşabiliyorsunuz fakat ivms 4200 ayar menüsünden ulaşamıyorsunuz?
 
Top