Can't Switch Cameras on the UI2 page

[EliteTechSystems]

Love the UI2 page over stock.

But I cant seem to figure out how to get all 4 cameras on at the same time (like when I look on the NVR), or even switch between cameras. I can see the clips list on the left, and can access those clips, but when I hit "Go Live", it sends me back to the only camera I can seem to get to load.

All cameras can be viewed on the stock jpegpull.htm page.

 

[Mike A.]

Try posting here:

I made a better remote-live-view page

 

[hltljohn]

In the black menu bar at the top, look for "Current Camera:". Under "Current Camera:" you can select what cameras you are viewing. When you change this it also changes the clips, but if you change what the clips are viewing it does not change Current Camera.

 

[EliteTechSystems]

Mike A - I will do that, thanks

hltjohn - I know exactly what you are referring to, but the only thing in the dropdown menu is "All Cameras", not the individual cameras.

 

[bp2008]

The dropdown shows all your group names (plus "All cameras") and is not intended to show every camera because some people have a lot of cameras.

However the video below should certainly contain all your cameras. If it is different from jpegpull in this regard, then something is certainly wrong. Can you create a temporary user account for me in Blue Iris and send connection information to me in a private message ("conversation")? Try the account yourself before you send it to make sure it demonstrates the problem.

 

[EliteTechSystems]

sent a conversation to you BP2008. thx

 

[bp2008]

Aha, this was another occurrence of the "no groups have webcasting enabled" issue. It is a rare configuration and UI2 doesn't handle it well.

 

[EliteTechSystems]

Many thanks for the help. ill get that changed and report back

 

[EliteTechSystems]

All. Fixed. Thanks a million for your help!