Change the firmware language of the Chinese DS-7104N-F 1 2021year of release

engr

n3wb
Joined
May 16, 2023
Messages
2
Reaction score
0
Location
ES
Hello, I want to change the language to English. Native firmware V4.73.200 build 230403 2021 release
What I've done.
Leaked native dump
tried to upload another dump from a similar board HiWatch DS-N208(C) Chassis (Main Board)_ 80433_p Rev 1.1
The DVR complains about the bootpara mismatch.
Tried to load modified firmware with changed language flag. It loads but throws an illegal software error.
I think that he has another place besides flash memory, where his factory settings are stored. since changing the entire dump does not give results.
What else can you try?

HKVS # printenv
arch=arm
baudrate=115200
board=fy10ds
board_name=fy10ds
bootargs=mem=160M console=ttyS0,115200n8
bootcmd=tftpboot 0x42000000 uImage;bootm 0x42000000;
bootdelay=0
cpu=armv7
default=cramfsload 0x42000000 uImage;
deviceID=RkYmz
ethaddr=e4:ba:5d:f3:49:4a
fdtcontroladdr=4ff55810
gatewayip=192.0.0.1
hik_ver=verison V2.5.0-70218-70217 (build 20220415203147 ci)
ipaddr=192.0.0.64
mac_mode=inner
mdio_intf=rmii
netmask=255.255.255.0
phy_addr=0
phyaddr0=0
sec=tftpboot 0x42000000 Ky2020-B2-uImage_sec;bootm 0x42000000;
serverip=192.0.0.128
soc=molchip
stderr=uart@0x18400000
stdin=uart@0x18400000
stdout=uart@0x18400000
tftpblocksize=8192
vendor=molchip
ver=U-Boot 2017.09-svn70217 (Apr 15 2022 - 20:31:39)
verify=y
 
Last edited:

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
25,190
Reaction score
49,087
Location
USA
You may be stuck - if it is region coded to a language then that is it.
 
Top