China hik 2432 5.1 motion detection

[zsshiwo1]

You should open the storge server when you use the IVMS4200 at the same time

 

[networkcameracritic]

This should be 5.0.2 - https://dl.dropboxusercontent.com/u/29612389/digicap.dav1140050031111110021

 

[angelojoanos]

5.1 broke the motion detection with ACC you need the new build of 5.1 140217
Its on their site:
FTP site below under folder /VMS_Firmware/ONVIF.

ftp://ftp.hikvisionusa.com
Username: hikfirmware
Password: Hikvision123


You will have to TFTP if using china model.

I have 2 2032's a 2632 and a 2632 on Avigilon with motion.
I tried everything before I found out there was an Onvif issue with the first 5.1 build.

Just the info I needed, THX much. I do not see 5.1 140217 build listed on hik ftp server.

 

[1Diesel]

Did you look under /VMS_Firmware/ONVIF.

I can't get to it from my phone. I'll verify when I get to a computer.

 

[networkcameracritic]

The only 5.1 on that site is Raptor_2xxx_Series_IP_Camera_Firmware_v5.1.0_131202.zip. May pay to go back to 5.0.2 or go with 5.1.2.

 

[1Diesel]

New firmware

Did you look under /VMS_Firmware/ONVIF.

I can't get to it from my phone. I'll verify when I get to a computer.

heres the best I can do with Remote Desktop.

 

[networkcameracritic]

That is a totally unexpected place for it. I would have never guess it would not be in Hikvision IP Cameras Firmware, but you are correct, it's under /VMS_firmware/ONVIF/IPC Raptor 2 Series/v5.1.0 build 140217.zip. My only concern is that the older 5.1 firmware zip file is about 400K larger in size.

 

[1Diesel]

Here's a pic of the newest ACC

 

[angelojoanos]

found it...thx

 

[angelojoanos]

Here's a pic of the newest ACC

very close to my setup. ACC5.2 and hik has to be the best combo out imo. Very stable, easy to use, simple setup, and no more remote client browser plugins needed for explorer/chrome/safari with 5.2.