Chinese 34567 camera port forwarding issue

[bigbroo]

Hi,

I really like Blue Iris and been using it for a while with Foscam cameras on remote locations with port forwarding in place.
Recently I purchased 12 chinese IP cameras with much better sensors and loads of settings.
Blue Iris recognized them as Cantonk cameras with 34567 streaming port.

BUT after installing them on sites there appeared to be an issue. Blue Iris can't recognize them.
It gives loads of information but no stream.
I desperately need your help guys!

Here is the output


Opening **** port 5180...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
HTTP 0
Opening *** port 5188...
ONVIF GetSystemDateAndTime
2020-02-12T07:07:18.000Z
Requesting device information...
Manufacturer: H264
Model: HI3516EV200_50H20AI_S38
FirmwareVersion: V5.00.R02.000559A7.10010.040400..ONVIF 2.41
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is 000
first source is 000
requesting URI for profile 000
RTSP URI: /user=admin_password=pwFekIkC_channel=1_stream=0.sdp?real_stream
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has PTZ service: /onvif/PTZ

 

[hotbrass]

I have four of these and they work great. Post screen shots of your video settings.

 

[bigbroo]

Thank you for your quick reply, they've been working fine locally too. The problem appeared when I installed them remotely and forwarded the relevant ports

 

[msecure]

Thank you for your quick reply, they've been working fine locally too. The problem appeared when I installed them remotely and forwarded the relevant ports

Did you port forward 34567 or the RTSP port? 554? BTW, Canton is Xiongmai rebadge. Be very careful if you are using the cloud function or port forwarding this IP camera.
Hisilicon/XM

 

[bigbroo]

On the camera settings they won't specify RTSP port, they call it Media Port there and it is 34567.
I tried to port forward everything to no avail. It work fine using their own NVR software, but, obviously I need it to work blue iris

 

[looney2ns]

Avoid Foscam and Reolink cams.
Don't port forward, you're asking to be hacked.
How to Secure Your Network (Don't Get Hacked!) | IP Cam Talk

 

[bigbroo]

Thank you, looney2ns, I was thinking about implementing that one day.
I currently have OpenVPN server running on a router where blue iris sits (192.168.10.0 network) .
How do I connect 5 locations for example with 5 cameras to it?

I tried to connect remote site's router as a VPN Client (kind of site-to-site) but the Blue Iris PC can't ping the camera ip (192.168.1.0 network)