Cleaning the cam

[mando209]

So cam at night(nightvision) would show something near the lens.some sort of little tiny dust flake.Ok so I put water on microfiber cloth then wiped the outer dome.thinking it would clear the flake.i guess the little flake is near the lens(inside dome)can I use compressed air can to get rid of it? Or what should I use?


Sent from my iPhone using Tapatalk

 

[SquareEyes]

I use lenspen micro:http://www.bhphotovideo.com/c/product/1047135-REG/lenspen_nmcp_1c_micro_pro.html


and a goats hair brush and a puffer (both Gittos brand and also from B&H)

 

[mando209]

so i bought the lenspen(full size) from amazon.thinking it was the one u mentioned.yea i know i didnt see the "micro" till now.anyways i used the brush to clean the lens.i also used the brush to clean the dome outside then inside.i also used microfiber cloth for inside the dome.i still see that foggy area to the left.is it the dome or lens? i dont see anything on the lens or dome after i cleaned it.daytime image is good.no problem there.i uploaded videos to viemo.friday video is after i cleaned it.


[video=vimeo;153580058]https://vimeo.com/153580058[/video]

[video=vimeo;153580057]https://vimeo.com/153580057[/video]

 

[fenderman]

This is ir reflection do to improper mounting or installation. See this,
https://www.ipcamtalk.com/showthread.php/1177-Hikvision-Foggy-as-***?p=10194&viewfull=1#post10194

 

[mando209]

yup that did it.i cleaned the inside of the dome.i used isopropyl alcohol on the microfiber cloth and wiped the inside of the dome(not the lens).


[video=vimeo;153719416]https://vimeo.com/153719416[/video]