Connecting a camera to a NVR through a Wireless Bridge

PaulHobb

n3wb
Joined
Jul 6, 2018
Messages
1
Reaction score
0
Location
NY
Hey Guys,

I'm hoping someone could help me out. I'm attempting to set up a camera system around my property. I'm using a FLIR camera system and I ran wired cameras around, but there is one spot I couldn't get a line to. I'm trying to use a TENDnet wireless bridge to set up this final camera but I'm not entirely sure how I have to have it configured.

I can ping both ends of the bridge successfully, but can't seem to find the camera attached.

Anybody try a set up like this before who might be willing to help me out?

Thanks in advance!
 

SirVenom

n3wb
Joined
Jun 27, 2018
Messages
26
Reaction score
11
Location
Australia
You might be pinging the management address of the bridges. Bridges by definition have no IP used fot the traffic itself, only for management. Can you post the ip address of the connections you are trying to get working? Are they all in the same subnet and set to bridge mode?
 
Top