Connecting HDW3549HP-AS-PV with Bosch PIR

[Levent]

Wondering if anyone had any clue on how to connect a PIR to an active deterrence camera so when the PIR tripped it would set off the siren and lights on the camera?

 

[MC1987]

Whats wrong with the onboard intelligence?

 

[genelit]

Yes that is no problem. Just connect to alarm input and configure as the picture below.
Note that you can set if the input is a NO/NC.
You can use this in parallel to the standard IVS-rules.

 

[Levent]

Whats wrong with the onboard intelligence?

I have it on a pole and been trying to get it to work so I can have quote on quote 360 censoring

 

[Levent]

Yes that is no problem. Just connect to alarm input and configure as the picture below.
Note that you can set if the input is a NO/NC.
You can use this in parallel to the standard IVS-rules.


View attachment 110985

Not sure why not working for me I'm using the alarm input on the camera and the inputs on the censor but when censor triggers it's not triggering the siren or lights

 

[genelit]

How did you wire it?
The alarm in is a circuit that need (easiest) to be closed/opened by a relay.

If you check the wiring there are 2 cables for alarm in, connect them and you'll see the alarm go off.

I'll explain better and with pictures tomorrow when I'm back at the computer.

 

[Levent]

How did you wire it?
The alarm in is a circuit that need (easiest) to be closed/opened by a relay.

If you check the wiring there are 2 cables for alarm in, connect them and you'll see the alarm go off.

I'll explain better and with pictures tomorrow when I'm back at the computer.

I had the camera in which is blue go into the pir nc gave and power to the PIR, also did blue into nc and for fun grey into t which is just for tamper but still