Convert LaView NVR to Hikvision Firmware?

Fallen

n3wb
Jan 27, 2016
2
0
Hey guys, long time lurker here; ive got a Laview NVR that is essentially the same as the E series 7716

Any chance there's a way to convert the firmware from Laview to proper Hik?

Model LV-N9916C6E
Serial No. BBRR
Firmware Version V3.3.1 build 160803
Encoding Version V1.0 build 150422
Web Version V4.0.1 build 150528
 
All chance!
Do you have original firmware at your hand for this device?
 
You must have any worl firmware from LaView for your devices & of couse make full dump for insurance ;)
 
So you’ll have to forgive me but while I am aware of the existence of the SDK tools for Hikvision; I’m unsure of how to interface with the NVR in the event of a bad flash.

That being said, if you perform a full dump of the Firmware; download the firmware from LaViews website and a comparable Hik firmware, you could in essence gut swap the contents of the flash. Am I correct in these assumptions? The 9916 series Laview is the same hardware if I’m not mistaken as the 7616 E series I “THINK”
 
No need to guess!
When you have working firmware at your hand for Laview NVRr, then it will be seen what it is and what it is eaten with;)
 
Yes it for the one decive.
Firmware for hik without boot loader, so you don't break anything.

If you try update from TTL, so save log
 
I attempted bsocko's 3.4.96 file, but I receive a "firmware mismatch" message on the .dav file. I have the same system details as Fallen listed in the original post. Not sure what is different, any help would be appreciated.
 
I attempted bsocko's 3.4.96 file, but I receive a "firmware mismatch" message on the .dav file. I have the same system details as Fallen listed in the original post. Not sure what is different, any help would be appreciated.
I also have the same NVR and wanted to know if anyone had success upgrading firmware .
 
I also have the same NVR and wanted to know if anyone had success upgrading firmware .
As I noted this didn't work for me with this version. I read Bsocko's other post, in there he references a "D" series and I have a "C" series NVR. @bsocko how can I determine the appropriate HIVision firmware for the LV-N9916C6E, (c series). SInce using this file and reading your other post, I think I would get the same error.