Dahau. Motion detection

[.05]

Hello!
I use PC-NVR and SmartPSS 1.14.2 and also tried SmartPSS 1.13.1,1.14.1.

When I enable MD in device config for first camera (or any) it starts rec all cameras. But I want to rec only one. How can I do it? I set MD for all chanels in Record Plan

 

[CaliGirl]

go back to device config where you turned that option on, select on the channel you want to record on that page

 

[.05]

there's only one channel "1"
But I see in Devices tab channels for each cam called 6000,6001... etc

 

[.05]

any idea?

 

[CaliGirl]

You have CAMERA MASKING selected. Do the same thing but select the next tab down that says MOTION DETECT.

I've never made that mistake myself ever!!! Lies!! I did the same thing.

Does that help you?

 

[.05]

You have CAMERA MASKING selected. Do the same thing but select the next tab down that says MOTION DETECT.

You're right. My fault. Wrong screenshot.
Here is correct.

Same issue.

 

[Tic]

Go to Storage>Record and check there. That's the last stop before the recording activates.