Dahau nvr not registering all cameras?

jreding

n3wb
Joined
Nov 2, 2019
Messages
3
Reaction score
0
Location
Saint Paul Minnesota
Hello!

Having a problem with a Dahau a NVR that will not register a couple of my older cameras. They did work until I upgraded the firmware on the NVR so I went back to the previous version of firmware. I included some screenshots of both NVR and camera config. pages.


NVR information page
nvr screenshot3.JPG



nvr screenshot3.JPG



Camera config. on NVR

nvr screenshot2.JPGip screenshot4.JPG

NVR camera config page showing camera not connected....note it is detecting the model number under "TYPE".

nvr screenshot1.JPG








Camera config. page .

ip screenshot4.JPG


Camera Config page with port numbers.






Another camera config page.ip screenshot3.JPG

With IP address:

ip screenshot2.JPG

General Camera Information:

ip screenshot1.JPG



These cameras are about 6 years old; there may be newer firmware available for the cameras but I am hesitant to upgrade the firmware because the manufactures webpage wants to make sure that the camera version is above a 4 but I cannot read the sticker on the camera due to sun and weather fading.

Any place I can get Dahau NVR firmware? I tried older versions but it will not accept the firmware upload.


The NVR is a DAHAU N52B3P4; 16 channel 4TB.


Thank in advance for any ideas!

John
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
15,521
Reaction score
22,657
Location
Evansville, In. USA
Have you tried manually adding the cams to the NVR?
click on the "manual add" button, fill in the blanks.
 
Top