Hello everyone. I wonder if someone could help me out with some video problems I am having. I recently had a Dahua dvr model number X72A3A4 installed with some dahua eyeball cameras A21CG02 (1080p). I decided to upgrade one of the cameras from 1080p to 4k, so I purchased the A82A652 4k eyeball camera.
The problem l am having is that when I hook up the new camera, I am getting a series of horizontal lines across the image. Tried two different new 4k cameras same problem. Dip switch on the camera is set to CVI, when l change the dip switch to cvbs, lines go away but the picture quality drops significantly.
Aldo, the camera settings in the DVR, under ENCODE, camera the max frame rate is 7, even when l drop the camera resolution to 1080p (whereas with the old camera itbwas 30 fps at 1080). Even at 1080p setting on the new camera, l get the horizontal lines.
l attached a couple of pic of the settings page..
Anyone know why I am getting the horizontal lines, and why the max frame rate is set to 7 on the A82A652 camera?
Thanks in advance...
The problem l am having is that when I hook up the new camera, I am getting a series of horizontal lines across the image. Tried two different new 4k cameras same problem. Dip switch on the camera is set to CVI, when l change the dip switch to cvbs, lines go away but the picture quality drops significantly.
Aldo, the camera settings in the DVR, under ENCODE, camera the max frame rate is 7, even when l drop the camera resolution to 1080p (whereas with the old camera itbwas 30 fps at 1080). Even at 1080p setting on the new camera, l get the horizontal lines.
l attached a couple of pic of the settings page..
Anyone know why I am getting the horizontal lines, and why the max frame rate is set to 7 on the A82A652 camera?
Thanks in advance...