Just installed a 32 channel hi def eyesurv NVR last night at a location about 3 hours away. I setup the router so I could log into each camera individually and adjust the settings if needed. I have a mixture of 1.3mp and 2.0mp cameras on the NVR. Today I remotely upgraded the firmware on one of the cameras and now whenever I log into any of the cameras it always displays the video from a single camera. I can change the settings and such on each camera but for some reason each camera is streaming the video from one camera (I dont think its the one I upgraded either).
Only thing I can think of is reboot the router and I logged into the router and all the settings look to be ok. Does the RTSP port have anything to do with it because I only changed the HTTP port when I setup the cameras
On a side note some of the cameras work better with chrome plus quicktime and others only work with internet explore and activeX. Any suggestions to make them all work on one browser?
Only thing I can think of is reboot the router and I logged into the router and all the settings look to be ok. Does the RTSP port have anything to do with it because I only changed the HTTP port when I setup the cameras
On a side note some of the cameras work better with chrome plus quicktime and others only work with internet explore and activeX. Any suggestions to make them all work on one browser?