Dahua IMOU camera owners, please share your information here! Thank you.

i have both the Turret (2MP) and the Cruiser (4MP). Both are Onvif, but only the Turret allows for local access (web) for more advance set-up (similar to any Dahua ip local interface). While contacting imou technical support, the following message:
“Currently with network access compatible camera models: Bullet Lite, Bullet Lite 4MP, New Bullet, Dome Lite. Currently, other devices do not support access via web page access.
Best blessings,
IMOULIFE support”
 
any way to add this to dmss? I have the amcrest version and was able to get it to work in BI with no issues but it sucks I can't use 2 way audio with dmss as it keeps asking to sign in, which I will not do.

I created an amcrest account with the amcrest app during initial setup for updates and not knowing about the config tool at the time. Now its on my IoT vlan which needs the config tool but still have no 2 way audio do to not being able to add to dmss and vlan not having internet.
 
Last edited:
if you are looking for PTZ on Imou Cruiser 4P in BI:

Here is my setup:
aaa.JPG

Not sure it is important but when I have initialised the camera via the Imou app, I made sure I entered the "Safety code" written under the camera as my password, I have read on another thread that this is the only password that the camera will accept for OnVif PTZ command so I did not take any chances to put another one in the setup

bbb.JPG

make sure you select "use another ip/port" and enter 80

Hope it works for you all
 
  • Like
  • Love
Reactions: Nettopp, pofofu, rra and 1 other person
goldriver said:
if you are looking for PTZ on Imou Cruiser 4P in BI:

Here is my setup:
View attachment 110011

Not sure it is important but when I have initialised the camera via the Imou app, I made sure I entered the "Safety code" written under the camera as my password, I have read on another thread that this is the only password that the camera will accept for OnVif PTZ command so I did not take any chances to put another one in the setup

View attachment 110012

make sure you select "use another ip/port" and enter 80

Hope it works for you all
Click to expand...
Hi thanks for sharing this information,
Btw, does this method also works on
other IMOU PTZ cameras like the Ranger 2?
 
for anyone that wants to use an app for 2 way audio or video adjustments, the amcrest view pro app works just fine with this camera and is completely local.
 
you may use DMSS for local viewing as well, but instead of using default 37777, change to port 80. Use safety code as PW
 
@eggsan Thanks for your input, but the discussion is not about DMSS.
It is about finding a working solution as to how can BI work with Imou cameras.

I know temporarily I can use its camera app to get your PTZ working.
But it would be nice if I can control PTZ movement thru BI running on my desktop PC.
 
wepee said:
@eggsan Thanks for your input, but the discussion is not about DMSS.
It is about finding a working solution as to how can BI work with Imou cameras.

I know temporarily I can use its camera app to get your PTZ working.
But it would be nice if I can control PTZ movement thru BI running on my desktop PC.
Click to expand...
Yes, I know. I should only reply to JonSnow, as an alternative to use also dmss, instead of amcrest
 
goldriver said:
if you are looking for PTZ on Imou Cruiser 4P in BI:

Here is my setup:
View attachment 110011

Not sure it is important but when I have initialised the camera via the Imou app, I made sure I entered the "Safety code" written under the camera as my password, I have read on another thread that this is the only password that the camera will accept for OnVif PTZ command so I did not take any chances to put another one in the setup

View attachment 110012

make sure you select "use another ip/port" and enter 80

Hope it works for you all
Click to expand...

Thankyou - these settings work on my Imou Ranger 2 (4MP) Model IPC-A42P-B. Took me a while to work out the password for "Admin" was the "Safety Code" on the bottom of the camera...

Very happy that the PTZ works via Blue Iris too

I also found on another thread to use the app "ConfigTool Mobile" - which enabled me to get rid of the "Imou" watermark overlay (Choose Show Channel Overlay and just set it to blank) and toggle encoding between x265/x264...
 
  • Like
Reactions: wepee
Guys,

Does anyone owe an IMOU Ranger 2 (2MP) Model: IPC-A22EP?

If you do, can you please let me know whether PTZ is working by
following the instructions of: goldriver

It seems like this instruction is only working for the following IMOU models with 4MP camera sensors:
1) IMOU Ranger 2 (4MP) IPC-A42P-B
2) IMOU Cruiser SE 4MP IPC-S41FP

and NOT IMOU Ranger 2 (2MP) IPC-A22EP 2MP camera sensors
(as far as I know, I have tested on the latest version of BI v5.5.6.19 x64-3/05/2022)

I followed the same instruction(see the picture below) as @goldriver,
my 2 units of IPC-A22EP refused to work. :confused: Not even in UI3.

Note: Password = the safety code of my cameras

2022-05-07_12-26-57.jpg

2022-05-07_12-28-43.jpg
 
Last edited:
  • Like
Reactions: carnalmischief
gatebland8 said:
Thankyou - these settings work on my Imou Ranger 2 (4MP) Model IPC-A42P-B. Took me a while to work out the password for "Admin" was the "Safety Code" on the bottom of the camera...

Very happy that the PTZ works via Blue Iris too

I also found on another thread to use the app "ConfigTool Mobile" - which enabled me to get rid of the "Imou" watermark overlay (Choose Show Channel Overlay and just set it to blank) and toggle encoding between x265/x264...
Click to expand...

Do you happen to have Blue Iris App running on your phone, does it works with the two-way talk feature?
 
goldriver said:
if you are looking for PTZ on Imou Cruiser 4P in BI:

Here is my setup:
View attachment 110011

Not sure it is important but when I have initialised the camera via the Imou app, I made sure I entered the "Safety code" written under the camera as my password, I have read on another thread that this is the only password that the camera will accept for OnVif PTZ command so I did not take any chances to put another one in the setup

View attachment 110012

make sure you select "use another ip/port" and enter 80

Hope it works for you all
Click to expand...
it worked for me but i cant get it to auto patrol.. or cycle between presets....any thoughts
 
Last edited:
wepee said:
@Caspy Hi, which IMOU model is working? Is it the IPC-A42P-B
Do you mind sharing?
Thank you.
Click to expand...
its the cruser 4k i just copyed the example above and it worked.. i cant get it to patrol or move between presets but im thinking it might not be a function of the camera.. but maybe someone in here can help me with that,,
 
Last edited:
Caspy said:
its the cruser 4k i just copyed the example above and it worked.. i cant get it to patrol or move between presets but im thinking it might not be a function of the camera.. but maybe someone in here can help me with that,,
Click to expand...
Yup, IMOU crusier 4MP is fully supported in terms of PTZ controls, but not the IMOU Ranger 2 2MP(I am the owner of 4 units )
Regarding the patrol/preset, I am not sure whether this consumer-grade camera supports it or not.
You may have to contact @EMPIRETECANDY to confirm this feature.
If you did not find anything about patrol/preset on its IMOU phone app, then I think is not supported, I may be wrong here.
As far as I know from the spec. it does not support it: Imou Crusier 4MP
 
You must log in or register to reply here.
Top Bottom