Dahua IPC 4300C - not responding.

[psycik]

Hi

I have 3 of these and an NVR. It was going yesterday or the day before but I'm getting no response from it now.

I take the cover off and I can see a red light for power, but can't see it on the network.

I've tried holding the reset button and seen the power light flicker at about 5 secs.

But it neither appears to the nvr, nor to a laptop hooked to the nvr and forced on to 192.168.1.200 or 192.168.0.200 (hoping the camera is on .108).

Any suggestions? I'd rather not have to take it down yet.

 

[zebrock]

Have you run onvif utility? Sounds like (if its not dead) you may have reset it and the ip has changed.

Sent from my SAMSUNG-SM-N930A using Tapatalk

 

[psycik]

I hadn't. After running the reset I tried the dahuq config tool but it wouldn't find it on the 192.168.20 or .0 or .1 subnets