Dahua IPC Problems with Smart PSS

N

nero2212

n3wb
Jul 22, 2021
7
1
Germany
Good Morning,
Why is it that I cannot get a live picture from my recorder with the Smart PSS software? but if I access the IP camera directly, yes.
I have 1 Dahua DHI-NVR2 and 2 Dahua DH-IPC-HFW1435SP. The cameras are connected to the recorder via Wifi.

The Recorder ist connected via P2P.
 
Thank you,
Smart PSS version is 2.003. 64bit from 2021-03-29.
My OS is Windows 10 / 64bit.
It is not due to my router, I have set up a HotSpot with my mobile phone. It doesn't work over that either.
Can u help me?
 
Does the NVR have a "green light" in device configuration?

Capture.JPG
 
nero2212 said:
Thank you,
Smart PSS version is 2.003. 64bit from 2021-03-29.
My OS is Windows 10 / 64bit.
It is not due to my router, I have set up a HotSpot with my mobile phone. It doesn't work over that either.
Can u help me?
Click to expand...

DHI-NVR2 - put here photo with label with model of device.
Directly ipc work correctly in smartpss?
What vide codec set at your ipc?
 
iTuneDVR said:
DHI-NVR2 - put here photo with label with model of device.
Directly ipc work correctly in smartpss?
What vide codec set at your ipc?
Click to expand...
The Camera work direct in SmartPSS correctly when I enter the IP of the camera directly.
 

Attachments

  • 3.png
    3.png
    19 KB · Views: 15
  • 4.png
    4.png
    37.2 KB · Views: 15
after update to win 11 my smartpss didi not show the streams anymore.
De;eted the device and added it again and Voila.
The light version takes many mintutes to load. Also after a fresh install so I stock to yhe older version

Just wanted to share
 
have to use smartpss lite, the old Smartpss is totally end of life.

DahuaWiki
 
You must log in or register to reply here.
Top Bottom