Dahua low profile PTZ - need a low profile mount

C

camviewer43

Getting the hang of it
Mar 14, 2020
177
50
US
No, only PFA107 fits. Everything else needs modifications. Look at the technical drawings Dahua provides for everything.

This plate comes with the cam and will be mounted to the underside of the cam:

21114.750@2x.jpg

21080.750@2x.jpg

PFA107:
wymiary_158911.jpg
 
If install to the ceiling, just use the metal plate it comes with then fine.
If install to the wall, just use the PFB203W, and make a DIY, drill a hole on it, then can be done. Easy and cost saving.
pfa107+pfb305w is dahua's standard wall mount.

1591021886711.png
 
chaosengine said:
No, only PFA107 fits. Everything else needs modifications. Look at the technical drawings Dahua provides for everything.

This plate comes with the cam and will be mounted to the underside of the cam:

21114.750@2x.jpg
Click to expand...
That plate is exactly what I need! Thanks so much. Weird, I just double checked and my box didn't come with the plate. I didn't even know about it. I brought it from Aliexpress and sat on it for too long before considering mounting. Might have to see if I can find it sold separately.
 
camviewer43 said:
That plate is exactly what I need! Thanks so much. Weird, I just double checked and my box didn't come with the plate. I didn't even know about it. I brought it from Aliexpress and sat on it for too long before considering mounting. Might have to see if I can find it sold separately.
Click to expand...
Did you see if it is attached to the camera?
 
  • Like
Reactions: camviewer43
You must log in or register to reply here.
Top Bottom