Hi everyone. I have one question about Motion detection, more specifically at alarm delay time setting. Camera model - Dahua IPC-HFW3441M-AS-SFC-I2. By default, alarm delay for Relay Out can be set from minimum 10 second up to 300 second. Is there any way or method to reduce this minimum time setting from 10 second, maybe down to 3 - 5 second. Previously I have try to set below 10 second i.e. 5sec/8 sec, but it not successful. Need anyone help. Thanks.
Dahua Motion Detection - Alarm Delay time configuration
- Thread starter pascaleng
- Start date
I maybe wrong! I think the alarm delay, is refering to how much time delay until the "next" alarm is triggered.
bigredfish
Known around here
Mark_M
Known around here
"Alarm delay" is the amount of time the relay output is active for when triggered.
Yes, Mark. It correct. But now I try to find a way how to set this delay below 10s. The default value is from 10-300s. Under IVS, I manage to set this value below 10 sec,by using HTTP API command. But for Motion detection, it is not successful. Is there anyway to overwrite this default value from 10 sec, to lower maybe 4- 5 second. Thanks.
Mark_M
Known around here
No.
And it is probably a software bug If you have managed to set a value below 10s via the HTTP API for IVS rule.