I have a Dahua NVR4208-8P-4KS2 and 4 Honewell H2W2PER3 cameras plugged on its PoE ports. The NVR connects to a 100Mbps switch where I have two computers that show two cameras each on two FHD monitors. Video is continuous, no motion detection. I have tried all possible settings, but my favorite would be H.265, 1080p, VBR, 20FPS, 2000Kbps upper limit. For some reason I am having lags and pauses of a few seconds randomly on all four cameras, (3-10sec every 10 minutes or so). Pauses occur on the NVR itself also when connected to a monitor.
Can you suggest a way to find out what is overloading in the NVR. The network graphic on the NVR shows below 10Mbps load.
Nothing I tried seems to affect the pauses.
Can you suggest a way to find out what is overloading in the NVR. The network graphic on the NVR shows below 10Mbps load.
Nothing I tried seems to affect the pauses.