I understand what this does, and I've added some SD cards into devices. However, if I reboot the NVR or if I test it by pulling network cables, it never actually "replenishes" anything.
I've got the NVR, which is 5864 with firmware 4.002. ANR is turned on for each channel where an SD card is plugged in. SD cards in camera interfaces shows video.
Any ideas or suggestions on what may be the missing link?
I've got the NVR, which is 5864 with firmware 4.002. ANR is turned on for each channel where an SD card is plugged in. SD cards in camera interfaces shows video.
Any ideas or suggestions on what may be the missing link?