Dahua NVR smartpss

M

M1CHA3L

n3wb
Nov 21, 2016
26
1
I have a dahua NVR5216, how do i automatically start smartpss on Windows with all camera's open?

Now i do manually start smartpss and must click on my camera layout


The same for iOS app, when i start the app i first must do 2 handlings, not easy for some people


Can it not automatically load the last view?
 
M1CHA3L said:
I have a dahua NVR5216, how do i automatically start smartpss on Windows with all camera's open?

Now i do manually start smartpss and must click on my camera layout


The same for iOS app, when i start the app i first must do 2 handlings, not easy for some people


Can it not automatically load the last view?
Click to expand...

What happens when you open Smart PSS on Windows?

I started the app and typed in my NVR's IP address and port and it connected.
 
When i start smartpss i must do 2 actions to open the liveview
I want when i start my computer, it automatically start smartpss with the liveview of my 4 cams, but it looks impossible
 
Go to Sys Config (little gear dooda in top right corner)

On first tab- 'Base" - Initial Page= Live View
Live View tab checkbox - Resume Last Preview

After that reboot the software and open again and get the view you want, then make sure that is the last thing open when you close SmartPSS (it will remember the last view)
 
Looks like minor differences in various versions of SmartPSS, but yep pretty much same setting. I'm running V2.00.0 Nov of 2016
 
  • Like
Reactions: c hris527
bigredfish said:
Go to Sys Config (little gear dooda in top right corner)

On first tab- 'Base" - Initial Page= Live View
Live View tab checkbox - Resume Last Preview

After that reboot the software and open again and get the view you want, then make sure that is the last thing open when you close SmartPSS (it will remember the last view)
Click to expand...

Yes THAT BE It
 
bigredfish said:
Go to Sys Config (little gear dooda in top right corner)

On first tab- 'Base" - Initial Page= Live View
Live View tab checkbox - Resume Last Preview

After that reboot the software and open again and get the view you want, then make sure that is the last thing open when you close SmartPSS (it will remember the last view)
Click to expand...

Ok thankyou that is it!

is it also possible with iPhone/android app you know?
 
With the app you must create a "favorite" view and it then requires 2 steps

1- open app
2- click on favorite star
 
You must log in or register to reply here.
Top Bottom