Dahua NVR5216-16 IPC Offline all cameras

M

mitch.gray

n3wb
Apr 28, 2020
18
0
Australia
Hi,

I have a Dahua NVR5216 with 7 x IP Cameras connected straight to the NVR. All of my IP Cameras have stopped working a couple days ago. Log is Saying IPC Offline Alarm. I am unable to goto site straight away as its about 600kms away. Any suggestions what have caused this issue?

Thank you


1604302319699.png
1604303141422.png
 
Last edited:
Couple of things: it does not seem to be a "wiring" issue as all camera's go down at the exact same problem. Which might indicate the POE power supply might be failing.
What I would do: top-right you got icons to logoff - reboot - shutdown. You might opt to give it a gentle reboot. Do not opt shutdown. That's evil.

Good luck!
CC
 
  • Like
Reactions: looney2ns
You can open the nvr and make sure the connectors are seated well, those which feed the poe board. Do this with the nvr off of course. Sometimes it comes down to the ribbons and connectors not seated well. Worth a shot.
 
You must log in or register to reply here.
Top Bottom