Dahua NVR5216-16P-4KS2E RTSP Problem

[steve1225]

lol
In my first post here I wrote that you should use proper link i gave you and it shouldn’t be there & in that link only &

Proper ending:

channel=6&subtype=1

 

[ikariwths]

Oh my god you are right from the beginning ,it works.
Thank you very mach for the great help.
Do you know if there is a channel with all the cameras together?usually named channel 0?

 

[steve1225]

Oh my god you are right from the beginning ,it works.
Thank you very mach for the great help.
Do you know if there is a channel with all the cameras together?usually named channel 0?

If your NVR is 16 channels then channel zero is on 17 (max + 1)

 

[ikariwths]

Thank you again.one last question. I have 16 channels Nvr but iam using 9 at the moment .Is it possible rtsp channel 17 with all the cameras to show me only those 9?
i am planning to use rtsp channel 17 to home assistant and i dont like all those black tiles.

 

[steve1225]

go to display / video options (second screen of icons on main page) and change display to 3x3 (View 9).
Or connect mouse and setup View 9 mode using right click menu...

 

[ikariwths]

I can not find this option , is it in those 2 pages?

 

[steve1225]

I can not find this option , is it in those 2 pages?View attachment 206928View attachment 206929

yep.. second screen...

Live Layout -> Live 9, and then list in table below...

but best is simply do this from HDMI interface (channel 0 is simply what NVR is displaying over HDMI, you can connect monitor or use channel 0 RTSP, connect any usb mouse and click on right button to have menu with different options)...
from HDMI interface you can enable AI Live right panel, with last AI detections which will be streamed in channel zero...
then You will have 3x3 live view + right panel with last 5 AI detections / snapshots...

 

[TonyR]

Oh my god you are right from the beginning ,it works.

Yessir, the URL as stated properly in my post #9 quite a ways back.
But hey, I've been there, done that too.

 

[ikariwths]

ok thank you ,almoste done.If i connect the nvr with a screen via hdmi . Is there an always on option,or the screen is going to suspend all the time?

 

[steve1225]

ok thank you ,almoste done.If i connect the nvr with a screen via hdmi . Is there an always on option,or the screen is going to suspend all the time?

NVR always display something over HDMI..
Normally is live view, but if you click right and select first option you can "login" to NVR with full interface, which looks/works almost the same as web version (but over HDMI there are a few more options)....