Dahua SD1A203T-GN PTZ control problem in BI 4

[nymphaeles]

I don't have any PTZ control for Dahua SD1A203T-GN in Blue Iris 4.7.6.2 x64. PTZ controls work fine if I connect directly to the camera through Pale Moon.
I suspect a protocol issue and have tried to use Dahua/Q-See RTSP instead of the default ONVIF (OXML), but that didn't help.
Anyone here having the same issue I have? What other settings can I tried to get this issue resolved?
Thanks

 

[looney2ns]

Mine works fine, and I added it simply by using Find/inspect.
Enter user/pass/ip address. click Find/Inspect.

 

[Illya_Kareoke]

I think I had the same problem at first, solved it by choosing Amcrest/Dahua on that screen you show.

 

[Terk]

I had that issue with one of my Dahua cameras and had to change the video setting to RTSP or one of the Dahua options rather than the PTZ setting.

 

[nymphaeles]

I had that issue with one of my Dahua cameras and had to change the video setting to RTSP or one of the Dahua options rather than the PTZ setting.

@Terk
It works with Amcrest/Dahua protocol. Thanks!