Hi,
I have a Dahua outdoor doorbel VTO2000a-VTOB108 in a simple constellation with a indoor DHI-VTH1550CH connected via the VTNS1060A POE switch.
The VTO is now no longer visible in the configtool after a crashed attempt to update firmware.
He is still alive can be pinged, only port 3800 is open ..
Holding the ringbuttton while powering on nor the 5 times pressing the tempering button seems a solution.
Help .. I am a n3wb ;-0
CONTEXT
Some years ago, to solve the push notifications problem to iphone over DMSS, I managed to update firmware of the VTO already from its orginal firmware to a 2018 version, I believe.
- what is the latest firmware for this VTO anyway ? I notiuced the VTO is now end of life, no dealer or Dahua support available. The Wiki is dreadfull..
I have downloaded on the dahua wiki the General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227 for MS windows 10 in search of the newest version of the VDP config tool.
- where is this ' V D P configtool' they advise you to use ? This toolbox, as well as the previous I used succesfully, contains a 'configtool' only ..
I found on a Dahua dealer new firmware available for the VTO .. Customer_VTOXXX_Eng_N_16M_SIP_V4.300.10BE000.0.R.20190708.bin
- there it went wrong .. I ready about UART and NFTEL .. no experience in that domain at all
The VTH was never updated and is still on V1.000.000 of 2015 because it never shows up in the ip search on the config tool, even not after a manual 'add'
- What is the latest firmware for the VTH anayway ? Should it be on v 4.3 as well to work properly ..
How to proceed from here ..
Thanks in adavce for your help.
I have a Dahua outdoor doorbel VTO2000a-VTOB108 in a simple constellation with a indoor DHI-VTH1550CH connected via the VTNS1060A POE switch.
The VTO is now no longer visible in the configtool after a crashed attempt to update firmware.
He is still alive can be pinged, only port 3800 is open ..
Holding the ringbuttton while powering on nor the 5 times pressing the tempering button seems a solution.
Help .. I am a n3wb ;-0
CONTEXT
Some years ago, to solve the push notifications problem to iphone over DMSS, I managed to update firmware of the VTO already from its orginal firmware to a 2018 version, I believe.
- what is the latest firmware for this VTO anyway ? I notiuced the VTO is now end of life, no dealer or Dahua support available. The Wiki is dreadfull..
I have downloaded on the dahua wiki the General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227 for MS windows 10 in search of the newest version of the VDP config tool.
- where is this ' V D P configtool' they advise you to use ? This toolbox, as well as the previous I used succesfully, contains a 'configtool' only ..
I found on a Dahua dealer new firmware available for the VTO .. Customer_VTOXXX_Eng_N_16M_SIP_V4.300.10BE000.0.R.20190708.bin
- there it went wrong .. I ready about UART and NFTEL .. no experience in that domain at all
The VTH was never updated and is still on V1.000.000 of 2015 because it never shows up in the ip search on the config tool, even not after a manual 'add'
- What is the latest firmware for the VTH anayway ? Should it be on v 4.3 as well to work properly ..
How to proceed from here ..
Thanks in adavce for your help.