οok I'll check it thanks
D damianos Young grasshopper Joined Oct 5, 2017 Messages 31 Reaction score 0 Location Greece Oct 8, 2017 #21 οok I'll check it thanks
D damianos Young grasshopper Joined Oct 5, 2017 Messages 31 Reaction score 0 Location Greece Oct 8, 2017 #22 Nothing i had changed power supply and the same thing. Any other idea please?
bababouy Known around here Joined Mar 29, 2015 Messages 1,053 Reaction score 1,630 Location almost to the bottom Oct 8, 2017 #23 Is this happening on both units?
D damianos Young grasshopper Joined Oct 5, 2017 Messages 31 Reaction score 0 Location Greece Oct 8, 2017 #24 Yes the same symptoms and the two pieces nvr both difrenet models
D damianos Young grasshopper Joined Oct 5, 2017 Messages 31 Reaction score 0 Location Greece Oct 8, 2017 #25 maybe the boards are not working anymore because overdrive of eccentricity but I would like to try flashing the firmware .Does anyone knows how;
maybe the boards are not working anymore because overdrive of eccentricity but I would like to try flashing the firmware .Does anyone knows how;
bababouy Known around here Joined Mar 29, 2015 Messages 1,053 Reaction score 1,630 Location almost to the bottom Oct 8, 2017 #26 Try unplugging the network cables and all cameras from both nvrs, just leave the power cable plugged into them. See if they boot up. If not, then your internal power supply have been zapped somehow.
Try unplugging the network cables and all cameras from both nvrs, just leave the power cable plugged into them. See if they boot up. If not, then your internal power supply have been zapped somehow.
