dh-h5d-5f No Web GUI or RTSP

[DocHodges]

All,
I purchased a DH-H5D-5F to playa round with as a good indoor camera to use with Frigate. Information was limited to I decided to give it a try. I was able to set up and see the camera without issues in the DSMM app. Inside the app however there is no configuration for ONVIF or really any RTSP etc. I then tried to access the camera web GUI but I get a 404 Not Found error. It seems the firmware doesn't not have a web GUI at all. Despite all of this I still tried to see if the RTSP was alive by inputting the config
rtsp:/admin:<password>@<ipaddress>:554/cam/realmonitor?channel=1&subtype=0. I also tried a few various of this to see if it would work. I also have a DH-H4C camera that has both a web GUI and seems to work no problem giving the RTSP stream. Is it possible the camera is only to be used within the DMSS platform? Has anyone come across such an outcome and what can be done to troubleshoot it? Any advice would be greatly appreciated.

 

[Scott12v]

Same problem here. Seems like a neat little camera but I can't login through the web or rtsp.

 

[Scott12v]

Actually, sort of got this to work. Still can't figure out how to access it via a web page, but I was able to get both streams to work in Blue Iris with the following settings:

Make: Dahua
Model: *RTSP
Cam #: (1 or 2 to choose which of the cameras you want to use)
Main Profile: /cam/realmonitor?channel={CAMNO}&subtype=0&authbasic={AUTH64}
Sub Profile: /cam/realmonitor?channel={CAMNO}&subtype=1&authbasic={AUTH64}

One thing I noticed is that it does not play well setting the Hardware Decode to Intel. Setting it to none or (in my case) Nvidia, it works fine.

The down side so far is that without the web site, I can't figure out how to turn off the Camera's watermarks. I also haven't gotten the PTZ controls to work yet.