GoNz0
n3wb
- Joined
- Mar 11, 2017
- Messages
- 18
- Reaction score
- 1
Hi, brand new DS-2CD2387G2-LSU/SL to replace an older 4mp Hikvision camera, I've setup the recording to my NAS the same as before, trigger recording on motion detection. I also added in a flashing light on detection for good measure.
The issue is last night it basically recorded for the entire night with the recording colour of the alarm, not once did it use motion, it wasn't detecting motion as the alarm light was off.
It's on the latest firmware (first thing I did) and due to the new feature of person and vehicle detection I've the basic event motion detection setup this time so I can make use of this to try and stop false positives from insects flying around at night.
I have checked all the settings and no alarm events are set apart from scene change detection and once daylight came it's recording normally again, basically no recording as it's a quiet back yard.
I'm more than a little stumped if anyone can throw some advice into the mix it'd be appreciated
The issue is last night it basically recorded for the entire night with the recording colour of the alarm, not once did it use motion, it wasn't detecting motion as the alarm light was off.
It's on the latest firmware (first thing I did) and due to the new feature of person and vehicle detection I've the basic event motion detection setup this time so I can make use of this to try and stop false positives from insects flying around at night.
I have checked all the settings and no alarm events are set apart from scene change detection and once daylight came it's recording normally again, basically no recording as it's a quiet back yard.
I'm more than a little stumped if anyone can throw some advice into the mix it'd be appreciated