DS-2CD2532F Pinout or color of Ethernet wires required

[Nitin]

Hello

I did not secure the Ethernet port of DS-2532F and during rain - water seeped into it.
Seems there was spark, and my PoE switch shutdown the power(Its a Nortel switch). Unfortunately, the pins of the socket got consumed in the park.

The camera powers up(12V) but doesnot respond to Ethernet. I can see physical damage on pin 7,8.
Before I cut the cable and solder new Ethernet socket - I want to hear if anybody else had this situation and how they solved it.
Ofcourse - I would require help in identifying colors of the cable after I cut it.

Thank you
Nitin

 

[fenderman]

@dalepa has this issue here http://www.ipcamtalk.com/hikvision/2035-hik-2632-rj45-recable.html?highlight=lorex
Not sure if he figured it out....if you cut the cable with some slack on the back you can figure out the working pins with a continuity tester. Then there are only two possibilities on the nonworking pins.
When you reseal it use coax seal....

 

[Nitin]

Thanks for the link - Since I have only 2 pins which are damaged, I will figure out the black grey issue of Lorex vs Hikvision will be very easy to identify using multimeter.

 

[nzipcamera]

 

[pal251]

That's good info thanks, hope I never need it

 

[Raikkok]

Sorry for upload this topic... but

someone knows where can I get the original pigtail from Hikvision cameras?

Thanks in advanced