DS-2CD63C5G0-IVS no Mic/no PTZ

[valbuz]

Hi
i have buy a DS-2CD63C5G0-IVS.
After take the intial config, it seem's all work fine. i can see the live stream.
So i want to configure the others like Mic/PTZ 4-mode
But i can't activate the int. Mic (error) and also the PTZ Function doesn't work. I can only have one Live Stream picture.

What's going on here? Are this limits in the Firmware?
My installed FW: FW 5.7.190 build 211210

Thanks a lot for any help.
I hope the cam is working proberly

pat

 

[trempa92]

You need to change Hardware mode, split 4 way, not software mode. Then it will really 4 channel split. Then add to NVR and add all 4 channels. Each channel should have PTZ control

 

[valbuz]

I didn't find it in the manual. where can i switch it?

thanks

 

[trempa92]

On the live view, web interface, left side

 

[valbuz]

No way for me :-(

 

[trempa92]

Im on V5.8.2 build 230619

 

[valbuz]

FW 5.7.190 build 211210

I didn't find a newer one...

 

[trempa92]

Ah my bad. I have this model



DS-2CD6365G1-IVS

Newer generation. But on yours should work as well as i recall it

 

[valbuz]

i try with the Edge and Chrome Browser.
Only with the iVMS Software it works.

 

[trempa92]

Try with internet explorer with plugin installed

 

[valbuz]

IE !
Do you mean ActiveX ?

 

[trempa92]

Yes, you have G0 serie which is old, new version support all browsers, older versions require plugin for certain functions to work

 

[trempa92]

This firmware should suit your camera aswell

https://www.hikvisioneurope.com/eu/portal/?dir=portal/Technical%20Materials/00%20%20Network%20Camera/00%20%20Product%20Firmware/Fisheye%20Camera%28DS-2CD63x5%29/G7%20Fisheye%28DS-2CD63x5G1%29/V5.8.2

Its shown in release note that your camera is supported

 

[valbuz]

i have try to downgrade to a older Firmware without success.
is it possible to downgrade?

 

[valbuz]

 

[trempa92]

Downgrades don't usually work if u reached certain structures in new firmware. Degrading process can brick camera.

 

[valbuz]

The Cam still works.
But you give me a link for downgrading the cam....and then tell me it can brick the cam...

 

[trempa92]

Did you even bother to check what firmware link i have sent you and what you have right now? If you did you wouldn't write this comment. My previous post was answering your question for downgrading and totally not related to firmware above that i've sent.