DS-7204HWI-SH/A resend request during Tftp

[Takoski]

Hi all!
I have this problem on my DVR it was brick. I've try to using TFT and ethernet crossover cable but after connection says "resend required". Can we help in some way? Thanks

 

[alastairstevenson]

after connection says "resend required".

That's not uncommon on a tftp file transfer - it just means a block failed it's checksum and it gets re-transmitted.
It may suggest some latency in the network connection, especially if it's a frequent message..
If the overall transfer completes OK it's nothing to be concerned about.

You should not need a crossover cable these days - maybe re-try with a normal straight-through.

 

[Takoski]

That's not uncommon on a tftp file transfer - it just means a block failed it's checksum and it gets re-transmitted.
It may suggest some latency in the network connection, especially if it's a frequent message..
If the overall transfer completes OK it's nothing to be concerned about.

You should not need a crossover cable these days - maybe re-try with a normal straight-through.

I dont know but the problem still alive.
The DVR Is briked .
Tried also with straight cable but the same situation.

What i can do?
Thanks for reply