Ds-7604 NI-E1/4P

[27grains]

Restarted NVR, my Password does not work neither does 12345.

I updated the firmware and had problems so I used factory default and I was forced to use all Capital letters because the arrow key did not change case.

What do I do now?

 

[alastairstevenson]

What do I do now?

What's the status via the web GUI?

 

[27grains]

No password I ever used or 12345 works.

using:
admin
pw.

I can't login, I can't TFTP, Don't know where to attach urart.

All I did was reboot (unplug) because after setting to factory default I had no reboot or shut down buttons
and when first ask to enter a password I had to use all cap letters would not change to lower case letters.

 

[alastairstevenson]

I think the 4-pin connector you've circled in red is the serial console connector.
For the USB to TTL serial - use 115,200 baud, 8 bits, no parity.

 

[27grains]

I circled two sets of pins 4 pins then
Two rows of 4 pins which 4?

 

[27grains]

Will the camers PW reset in this forum work for nvr's?

 

[alastairstevenson]

I circled two sets of pins 4 pins then
Two rows of 4 pins which 4?

The white 4 pin connector next to the 3 capacitors in a row, not the 8 pin header block labelled JP12.

 

[27grains]

The white 4 pin connector next to the 3 capacitors in a row, not the 8 pin header block labelled JP12.

I think I understand,

 

[alastairstevenson]

Yes, that's the one that looks to me like the serial console connector.