Menu
What's new

DS7616-NI latest firmware

B

Brooklyn718

Young grasshopper
Joined
Aug 28, 2016
Messages
47
Reaction score
0
I can not find the latest firmware of the DS7616-NI

its a discontinued model and I need to upgrade my unit.

I found this link here but every time I try to click it says forbidden
I also found 2 on the euro site but not sure if they would work


please help if you have had any experience with this.

Thank you
 
alastairstevenson

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,973
Reaction score
6,798
Location
Scotland
Brooklyn718 said:
I can not find the latest firmware of the DS7616-NI
Click to expand...
That's an incomplete model number.
Assuming it's a DS-7616NI-E2

Brooklyn718 said:
I found this link here but every time I try to click it says forbidden
Click to expand...
That works OK for me, downloads dz_k41_ml_std_v3.4.96_171128.zip

Brooklyn718 said:
I also found 2 on the euro site but not sure if they would work
Click to expand...
These should work, but it's not the latest.
Check out the 3.4.106 version :
 
B

Brooklyn718

Young grasshopper
Joined
Aug 28, 2016
Messages
47
Reaction score
0
got a message that says upgrading failed firmware mismatches :-(
 
alastairstevenson

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,973
Reaction score
6,798
Location
Scotland
alastairstevenson said:
OK, so the linked firmware on Post #2 should work.
Click to expand...
Hmm... but maybe not if the NVR is actually the Swann model you referenced here :
After some research, I determined that the NVR-7095 most likely matched the hardware of the ds-7616NI-E2 unit. I downloaded DS76xxNI-E1(E2)P_USA_Firmware_v3.4.92_170518 (for record, I was running the most up to date firmware released for the NVR16-7095), copied the file to a flash drive and used the NVR to flash the upgrade.
Click to expand...
edit
While the Swann firmware might not object to applying the Hikvision firmware, the new Hikvision firmware might object to being applied to Swann hardware, which will have an embedded OEM code identifying it as such.
 
alastairstevenson

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,973
Reaction score
6,798
Location
Scotland
Brooklyn718 said:
sorry the swann model is NVR-16 7095
Click to expand...
OK, so not actually a DS-7616NI-E2
That's likely to explain why the running firmware treated the Hikvision firmware being applied as incompatible after checking the OEM code.

As a long shot - you could try applying the newer Hikvision firmware via the Hikvision tftp updater tool.
There are fewer validations via that route, but a positive outcome isn't guaranteed.

TFTPServ

Hikvision IP Camera Emergency Firmware Recovery TFTP. Check this thread for info on how to use this tool to un-brick your Hikvision camera.
www.ipcamtalk.com www.ipcamtalk.com
 
You must log in or register to reply here.
Top