Anyone know what is the issue with the IVS marking/recordings not working on NVR5224 upgraded firmware to General_NVR5XXX-4KS2_MultiLang_V4.001.0000006.1.R.210709 and also DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.6.R.221115. Having issue with all the connected camera models, (IPC-HWD5231-ZE, IPC-HDBW4231F-E2-M, DH-SD1A40XB-GNR, IPC-COLOR4K-T).
Interestingly, if the target filter is enabled on the IPC-COLOR4K-T, there is an IVS clip/recording however no alarm marking on the playback timeline either.
The IVS markings were red on the playback timeline on the NVR and was previously working before the upgrades. I'm hoping this is not a permanent feature, i.e. change in behaviour.
Interestingly, if the target filter is enabled on the IPC-COLOR4K-T, there is an IVS clip/recording however no alarm marking on the playback timeline either.
The IVS markings were red on the playback timeline on the NVR and was previously working before the upgrades. I'm hoping this is not a permanent feature, i.e. change in behaviour.