netnode
n3wb
I have a Hikvision DS-7604NI-K1/4P (B) 4ch 4K NVR with two DS-2CD2087G2-L(U) cameras and I am awaiting another camera.
What is the best way to configure the events and or smart events?
Should I use the interface of the NVR or config setting on the actual camera?
I ask as, via the camera config, if I set the lights of the camera to come on when movement is detected it will not send an email as configured in the NVR settings?
Do I not use the NVR at all and just the camera settings or can you use a bit of both? Although it seems that the camera settings override the NVR settings?
This is all new to me.
Also, if via the NVR settings I turn on the led camera lights, my monitor screen seems to freeze at the point the lights come on.
Attached is a shot of the screen frozen, you can see near the middle bottom a blue bar etc. is that of any significance as they only appear when the screen freezes?
Thanks in advance for your help.![20210323_202230.jpg](/data/attachments/85/85905-e72cc1917e55cdae0d82f07cee28f0d0.jpg)
What is the best way to configure the events and or smart events?
Should I use the interface of the NVR or config setting on the actual camera?
I ask as, via the camera config, if I set the lights of the camera to come on when movement is detected it will not send an email as configured in the NVR settings?
Do I not use the NVR at all and just the camera settings or can you use a bit of both? Although it seems that the camera settings override the NVR settings?
This is all new to me.
Also, if via the NVR settings I turn on the led camera lights, my monitor screen seems to freeze at the point the lights come on.
Attached is a shot of the screen frozen, you can see near the middle bottom a blue bar etc. is that of any significance as they only appear when the screen freezes?
Thanks in advance for your help.
![20210323_202230.jpg](/data/attachments/85/85905-e72cc1917e55cdae0d82f07cee28f0d0.jpg)