For Sale: TP-LINK CPE-510 5GHz wireless bridge kit, pre-configured
This kit consists of 2 of the below linked TP-LINK CPE-510 5GHz radios, each pre-configured with a private, static IP address and presently functioning as AP (Access Point) for local install and CLIENT for remote install, thus providing a wireless bridge between 2 points or buildings, provided there is adequate LOS (Line Of Sight) between them and the radios are properly mounted and aimed.
The 2 units were in the field and functioning flawlessly a little over 2 years, mounted outdoors but under a roof overhang so were out of direct weather, are very clean and come complete with 24VDC passive POE injectors with mounting brackets and injector power cords.
You can use as-is, a conventional private LAN router or switch even if in a different subnet will allow these devices to pass data (unless they conflict with your subnet). If you prefer to reconfigure them, temporarily set a PC to a static IP in the same subnet that I have them configured with, plug into the POE injector's LAN port (I'd do the CLIENT first), log into the webGUI, re-configure to your liking (Static IP, username, password, SSID, etc.) then swap over to the AP and re-configure it. Allow about 45 seconds for the pair to re-connect and function as a wireless bridge when powered back up.
Reconfiguring with unique, static IP’s in YOUR subnet will facilitate initial alignment for optimum performance and future operational checks.
I suggest bench-testing the reconfigured bridge before installing in the field. For a suggestion of a couple of inexpensive and easily-made PVC mounts, go here.
The price is $80 or B.O. shipped to anywhere via USPS in the 48 contiguous states of the U.S. Payment using PayPal preferred. Please PM me if interested or if there are any questions.
TP-Link 5GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 13dBi, 15km+ | 24VDC Passive PoE Powered, PoE Injector included | Pharos Control (CPE510) White
This kit consists of 2 of the below linked TP-LINK CPE-510 5GHz radios, each pre-configured with a private, static IP address and presently functioning as AP (Access Point) for local install and CLIENT for remote install, thus providing a wireless bridge between 2 points or buildings, provided there is adequate LOS (Line Of Sight) between them and the radios are properly mounted and aimed.
The 2 units were in the field and functioning flawlessly a little over 2 years, mounted outdoors but under a roof overhang so were out of direct weather, are very clean and come complete with 24VDC passive POE injectors with mounting brackets and injector power cords.
You can use as-is, a conventional private LAN router or switch even if in a different subnet will allow these devices to pass data (unless they conflict with your subnet). If you prefer to reconfigure them, temporarily set a PC to a static IP in the same subnet that I have them configured with, plug into the POE injector's LAN port (I'd do the CLIENT first), log into the webGUI, re-configure to your liking (Static IP, username, password, SSID, etc.) then swap over to the AP and re-configure it. Allow about 45 seconds for the pair to re-connect and function as a wireless bridge when powered back up.
Reconfiguring with unique, static IP’s in YOUR subnet will facilitate initial alignment for optimum performance and future operational checks.
I suggest bench-testing the reconfigured bridge before installing in the field. For a suggestion of a couple of inexpensive and easily-made PVC mounts, go here.
The price is $80 or B.O. shipped to anywhere via USPS in the 48 contiguous states of the U.S. Payment using PayPal preferred. Please PM me if interested or if there are any questions.
TP-Link 5GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 13dBi, 15km+ | 24VDC Passive PoE Powered, PoE Injector included | Pharos Control (CPE510) White
As an Amazon Associate IPCamTalk earns from qualifying purchases.
