Frequent Freeze when using IVMS-4200

[Faivon]

Got a problem here, I have about 230+ cameras in IVMS-4200. The software quite often freeze when trying to enlarge a camera during a live view.
I've checked the PC performance with Task Manager and it's not overloaded. So why is that?
The PC spec is i5 gen 11, onboard GPU, SSD 500 GB and 8 GB memory. I don't think the pc is lagging behind. It's either the software is faulty or too many camera?

 

[trempa92]

Yeaaaah,this not gonna work. The specs are too low. Check the servers specs hikvision provide for full VMS experience.

 

[tech_junkie]

ivms is only good for so many cameras simultaneously in live view depending on their resolution and computer used. If you look at pg 7 of:

https://www.hikvision.com/content/dam/hikvision/en/support/download/vms/ivms4200-series/software-download/v3-8-0-4_e/iVMS-4200-Client-Software_Datasheet_V3.8.0_20220706.pdf

you will find what your expected performance is. The network interface on the computer and bandwidth in the network start over loading very easy past 128 cameras @4K.