Generic camera audio - on and off hissing noise from BI - Works in VLC

[scoob8000]

I got a generic Wansview/Galayou G7 cam that I've got working in BI but I can't get the audio working.

In BI I get a hissing noise that comes and goes. Doesn't matter to seem what I pick from the dropdown.

If I open the RTSP stream in VLC I get audio. If it tells us anything, Codec info in VLC shows the audio is:

MPEG AAC Audio MP4a
Stereo
16000hz
32 samples

I've tried all the wansview profiles in BI, but none provide video. I can only get video using the Generic ONVIF setup.

 

[TonyR]

Have you tried different /lower "gain" and "sensitivity" settings in BI's camera "settings" => "audio" tab?

 

[scoob8000]

Have you tried different /lower "gain" and "sensitivity" settings in BI's camera "settings" => "audio" tab?

Yeah I did try that, it just made the static quieter.

 

[TonyR]

Yeah I did try that, it just made the static quieter.

I just wish I could do that with my tinnitus!

 

[adabow]

Hello, did you ever figure this out? I am having the same issue with a Wansview lightbulb camera.

 

[Pvjxtra]

I hav

I got a generic Wansview/Galayou G7 cam that I've got working in BI but I can't get the audio working.

In BI I get a hissing noise that comes and goes. Doesn't matter to seem what I pick from the dropdown.

If I open the RTSP stream in VLC I get audio. If it tells us anything, Codec info in VLC shows the audio is:

MPEG AAC Audio MP4a
Stereo
16000hz
32 samples

I've tried all the wansview profiles in BI, but none provide video. I can only get video using the Generic ONVIF setup.

I have a G7 and it works with the standard setup. I see its IP address on my network but how can I access it from my Blue Iris? I assume there is a server in the camera but what is the default username and password?

 

[TonyR]

I have a G7 and it works with the standard setup.

What is "the standard setup"?
Did you scan a QR code with the Wansview app and you see it on your phone?

I assume there is a server in the camera but what is the default username and password?

I would not assume that it does have a webGUI accessible from a PC but setup, if any, likely is done through a smartphone app.
I'm surprised that it "works with the standard setup" if you don't know the username and password.

 

[TonyR]

@Pvjxtra,

If you are not successful with the G7, return it if you can and if you like the G7's form factor and performance AND want it to stream to Blue Iris, get the TP-LINK Tapo C-110. It is similar in performance to the G7 and it will stream RTSP video with audio to Blue Iris as shown here => How to stream RSTP from TP-LINK Tapo C110 camera to Blue Iris or VLC