I will have 10-15 total devices that require power off my DSC 1832 alarm system. I know there is a mA rating for power supplies so will have to add things up to see if I have to go one larger.
Let's see... for sure 6 minimum PIR's (4 indoor, 2 outdoor), 2 glass break detectors, 2 control keypad panels, 1 Envsyalink card, 2 expansion cards.
That is 13 devices that need the DC power from my main DSC motherboard. I am at a loss at how to connect all power for 13 devices. Do folks use a couple wire nuts? Terminal strips? WAGO terminal blocks?
When try to google search about wiring power connections in alarm panels, 99% comes back as if just installing 1 device so that's no help.
Let's see... for sure 6 minimum PIR's (4 indoor, 2 outdoor), 2 glass break detectors, 2 control keypad panels, 1 Envsyalink card, 2 expansion cards.
That is 13 devices that need the DC power from my main DSC motherboard. I am at a loss at how to connect all power for 13 devices. Do folks use a couple wire nuts? Terminal strips? WAGO terminal blocks?
When try to google search about wiring power connections in alarm panels, 99% comes back as if just installing 1 device so that's no help.