Got DS-2CD2432F-IW - no lights when ethernet plugged in?

[sk77289]

Hi - I took a recommendation from the following thread and got a DS-2CD2432F-IW: https://www.ipcamtalk.com/showthrea...ce-based-on-my-requirements?p=49757#post49757

I finally got around to plugging it in, and nothing seems to happen. I show no link on my router, and no lights on the camera? Do I have a defective camera or am I doing something wrong?

Thx in advance for any advice!!

 

[AlpineWatch]

how are you powering this?

 

[fenderman]

@sk77289 You need to use a poe injector/switch or a 12v power supply. As with most POE cameras they generally do not come with a power supply.

 

[sk77289]

Well I'm sure to sound like a noob over this one - I was hoping to power via POE, is there a special switch I need to throw on the camera for this, or do I need a special type of router to offer POE? The manual was a bit cryptic...

 

[fenderman]

Well I'm sure to sound like a noob over this one - I was hoping to power via POE, is there a special switch I need to throw on the camera for this, or do I need a special type of router to offer POE? The manual was a bit cryptic...

You need a poe injector or switch..a standard switch or router will not supply the power. http://www.amazon.com/TP-LINK-TL-SF...TF8&qid=1446581327&sr=8-3&keywords=poe+switch
http://www.amazon.com/TP-LINK-TL-Po...8&qid=1446581341&sr=1-4&keywords=poe+injector

 

[sk77289]

Got it...thanks!!