Greetings

[iherbak]

Hi!

I just bought a dahua system (one NVR and two ip cams), and about to learn it.
You may already have a clue where to start, if so please tell me.

The manual is mainly just enlisting the menus, but i would like to know what's behind. The UI behaves incosistently as far as i could see. So i'm here seeking answers.

Best regards,
István

 

[wittaj]

Here you go.

***PSA for those with a New DAHUA NVR with Built-in PoE switch

IF you have a Dahua NVR with built-in PoE switch... DO NOT follow instructions telling you to use the config tool or switch the IP of your cameras or initialize anything..! With NVR's typically with a -P designation (Built-n PoE switch - example: 4208-8P-4KS2) none of that is required and it...

ipcamtalk.com

 

[gwminor48]

Hello István, welcome to the forum.

 

[sebastiantombs]

 

[iherbak]

Here you go.

***PSA for those with a New DAHUA NVR with Built-in PoE switch

IF you have a Dahua NVR with built-in PoE switch... DO NOT follow instructions telling you to use the config tool or switch the IP of your cameras or initialize anything..! With NVR's typically with a -P designation (Built-n PoE switch - example: 4208-8P-4KS2) none of that is required and it...

ipcamtalk.com

Wow. That is something you expect least. But thanks for the link. I will restart my setup

 

[Snapper30]