Hardware

[JB6969]

Wiring diagram for Sannce camera

 

[TonyR]

Concerning "...wiring diagram for Sannce camera"?

• You have one ?
• You need one?
• If the latter, do you have a model number or picture of the cam's label that you can share?

P.S. - Welcome to IPCT !

 

[JB6969]

Model number C11DT

 

[TonyR]

This may help ==>> Hi, I have a sannce poe camera that I need to replace the poe connector for.

 

[JB6969]

Yes I'm just switching out the plug so I can make it compatible with my DVR and I'm not sure which ones are the tire wires and it was once or for the video

 

[TonyR]

Is the original RJ-45 connector in place so that you can use a DVM/ohmmeter or continuity checker to buzz out the existing connector pins to their corresponding wire color?

 

[JB6969]

 

[JB6969]

View attachment 122375View attachment 122375

I need the wiring diagram for it

 

[TonyR]

I need the wiring diagram for it

Understood.
Is the original RJ-45 connector in place so that you can use a DVM/ohmmeter or continuity checker to buzz out the existing connector pins to their corresponding wire color?
If so, this chart below may help fill in the color to pin assignments. The fact that it's 12vdc (only?) may hint that its sPOE (Simplified POE, not conventional POE) so doing a continuity check might be essential.

 

[JB6969]

It doesn't have that connector all this guy is five wires sticking out it was cut

 

[JB6969]

Yeah she reads one yellow and two blacks

 

[TonyR]

Yeah she reads one yellow and two blacks

Can you post an image of the "....five wires sticking out it was cut"?

It seems that's an analog camera, so we're likely going to have power positive and negative and composite video, center and shield so at least 4.

EDIT: More research reveals it's a 3-in-1 cam that capable of 3 analog modes: TVI, AHD and CVI so the 5th wire could be for a reset button that allows you to set up one of the modes.