HDW5231R-ZE Blur Reduction (Day & Night)

Discussion in 'Dahua' started by saggybeans, Jul 18, 2019.

Share This Page

  1. saggybeans

    saggybeans Young grasshopper

    Joined:
    Jul 10, 2019
    Messages:
    36
    Likes Received:
    16
    Location:
    Canada
    Hello All,

    I recently purchased a HDW5231R-ZE from Andy @ empiretech and was hoping you guys could give me some tips for settings. I noticed that when there is motion (Day or Night) like a person running or a car moving that there is a blurry halo around the object. I heard that it is mainly due to either 3DNR (so I set to 10) and also exposure (specifically shutter rate). I tried to manually adjust the shutter but it seems to make the entire image a bit blurry and I couldn't get a setting that looked as crisp as auto. Turning down the 3DNR seemed to make it a bit better but I was hoping you guys can look at my settings and let me know if something seems off. My camera is situated on my porch facing the street. I have good white 5000k lighting in the front as well as LED street lighting so I enabled forced color and disabled IR and it seems to look better than B&W with IR. Here are my current settings:

    H.265
    1080P
    15FPS
    VBR
    6(Best)
    8192 Bit Rate
    I Frame 15

    Profile = Full Time (DAY)
    Zoomed out Fully

    Picture:
    Style - Standard
    Brightness - 50
    Contrast - 50
    Saturation - 50
    Sharpness - 60
    Gamma - 50

    Exposure
    Anti-Flicker - Outdoor
    Mode - Auto
    Auto Iris - ON
    3DNR - ON
    Grade - 10

    Backlight = OFF
    WB = Auto
    Day & Night = Color
    IR Light = OFF
     
    Last edited: Jul 19, 2019
  2. bigredfish

    bigredfish Known around here

    Joined:
    Sep 5, 2016
    Messages:
    2,301
    Likes Received:
    2,398
    Location:
    Florida USA
    What is the actual exposure setting? Try 1/60 for starts

    You may simply not have enough light

    Post a full res image or better, videlo clip
     
    looney2ns likes this.